Tuesday, 10 September 2013

Takagi T-KJr2-IN-NG Indoor Water Heater

Posted by adam faith on 10:07 with
Takagi T-KJr2-IN-NG Indoor Tankless Water Heater, Natural Gas


List Price:$1,130.00
Price:$557.69 FREE Shipping.
You Save:$572.31 (51%)
In Stock.
  • 140,000 BTU
  • 6.6 GPM max flow rate
  • 4-Inch category III stainless steel venting required
  • Inlet, outlet thermistors for constant temperature monitoring
  • Energy factor of 0.81-0.83


Customer Reviews:
 Takagi hot water heater,
by Leslie Burnett:
It was great to order online, I haven't set it up as yet. It is also nice to see the shipping progress online. I have another Takagi hot water heater in my home and it works great...saving lots on gas.
☆ Owner / plumber
by jcupp:
i have 3 of these in my home and rent houses
this is the best i even use it to fill my hot tub with hot water
if you have a small family 5 or less it will be fine for your needs
hope the info helps we relocated ours to the attic and it saved us more closet space too.


Takagi Tankless Indoor Water Heater -- Natural Gas - T-KJR2-IN NG Techs and Specs
  • Gas Type
    Natural Gas
  • Power Input
    19,500 to 140,000 BTU
  • Water Pressure Minimum
    15 PSI
  • Maximum
    150 PSI
  • Gas Connection (Min)
    3/4 Inch Male NPT
  • Water Connection
    3/4 Inch Male NPT
  • Power Input Natural
    19,500 to 140,000 BTU
  • Water Pressure Minimum
    15 PSI
  • Maximum
    150 PSI
  • Gas Connection (Min)
    3/4 Inch Male NPT
  • Water Connection
    3/4 Inch Male NPT
  • Natural Manifold Pressure
    2 to 2.5 Inch W.C.
  • Propane Gas Manifold Pressure
    2.5 to 3.1 Inch W.C.
  • Electrical Supply
    120 Volts
  • Weight
    33 pounds
  • Dimensions
    (H x W x D) 20.5 inches by 13.8 inches by 6.7 inches
  • Maximun Water Flow
    6.6 GPM
  • Minimum Flow to Activate
    .5 GPM
  • Temperature Settings with Temperature Remote Controller
    99, 100, 102, 104, 106, 108, 109, 111, 113, 115, 117, 122, 131, 140, 158 and 167 Degrees
  • Exhaust Vent Size
    4 Inch Sealed Stainless Steel CAT III Vent Pipe
  • Max length
    50 Feet (subtract 5 feet each 90 degree elbow with a maximun 5 elbows)
  • Intake Vent Size (optional)
    4 Inch Piping
  • Ignition
    Electronic Ignition
  • Backflow Preventer
    TK-BF01 Required in weather condtions bedlow 36 F degrees
  • Vertical Condensation Drain
    Install per local code